Posted: 2010-01-20, 11:47 RDAA-81 Recovery to original fw?
How to recover original RDAA-81 firmware to APpro5003v2 device? We have HW license, but the module we used for other device. Now we would like to recover it to original firmware.
Set up a TFTP server on 192.168.1.254 IP address, put the zImage file in server's upload directory (rename RDAA's firmware to zImage), and trigger a firmware download (option '2' from bootloader) via serial console.
If you don't have a serial console, you could damage installed firmware (overwrite part of flash area with any data), so during the boot up the bootloader will detect a CRC mismatch and will start firmware download by itself.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
